This is the replacement motor for the Lakro Domestic Electric Coconut Scraper (model LCS-009), sold on its own so that a scraper with a worn-out or burnt-out motor can be put back to work instead of being replaced. It is the same Lakro-labelled motor, type HF-1518N, that drives the scraper's stainless steel head. Lakro scrapers are made in Sri Lanka.
What you receive. A compact motor in a black enamelled housing with ventilated end caps, two brown supply leads finished with ring terminals, a metal drive coupling on the shaft, and two threaded studs at the drive end for mounting it inside the scraper body.
Two voltages — match the motor to your scraper. The motor comes in two builds, and you choose between them on this page:
- 110 V — for a scraper built for North America (United States, Canada and other 110–120 V countries). The unit in the photographs is this build; its label reads input 150 W, 110 V, 1.5 A, 50/60 Hz, 8,000 rpm.
- 220 V — for a scraper built for a 220–240 V supply (Sri Lanka, the United Kingdom and Europe, most of Asia and Africa, Australia and New Zealand).
Order the build that matches the scraper you are repairing. Check the rating plate on the machine if you are not sure. A 110 V motor fitted to a 220 V machine will burn out at once, and a 220 V motor in a 110 V machine will barely turn.
Which scrapers it fits. The motor is listed for the LCS-009 domestic scraper. The domestic scraper has also been sold as the ACS-01, which has a different housing. If yours is an ACS-01, or you cannot find a model number, send us a photograph of the rating plate before you order and we will confirm.
Fitting it. Replacing the motor means opening the scraper and connecting mains wiring. Have it done by someone competent with small-appliance repairs. Unplug the machine first, note how the old motor's leads are connected before you remove it, and make sure the housing is fully closed again before the scraper goes back into use.
Technical data
- Type: Lakro HF-1518N
- For: Lakro Domestic Electric Coconut Scraper, model LCS-009
- Builds: 110 V or 220 V — selected on this page
- 110 V build (as labelled): input 150 W, 1.5 A, 50/60 Hz, 8,000 rpm
- Connections: two leads with ring terminals
- Mounting: two threaded studs at the drive end
- Housing: black enamelled, with ventilated end caps
